Build your own Daiwa Harrier Combo and choose your Daiwa Saltist Reel to match your needs. This Daiwa Combo comes complete with 30lb Daiwa J-braid and 2 Torpedo Glider Jigs with the built in swivel at a discount !
Save $50 Dollars
Rod:
the HARRIER SLOW PITCH JIGGING ROD. Designed for the more subtle technique of "Slow Pitch" jigging where the jig is deployed much slower and more deliberately. It is a vertical jigging technique that has gained in popularity in Northeast, Southeast and Gulf fisheries. The thin profile blank, with a smaller diameter, delivers a sharp action and serves to better control the jig.
|
MODEL |
POWER | LENGTH | SECTIONS | LURE WEIGHT |
|---|---|---|---|---|
| HSP66MB | 1 | 6'6" | 1 | Max 250g |
| HSP66MHB | 2 | 6'6" | 1 | Max 300g |
| HSP66HB |
3 | 6'6" | 1 | Max 400g |
| HSP66XHB | 4 | 6'6" | 1 | Max 500g |
REELS
The Daiwa Saltist Star Drag Conventional Reels are built from machined aluminum and anodized for maximum corrosion resistance making them sturdy and durable yet high performing. They are the best starter slow pitch jigging reel! Compact in size and adequate line capacity for targeting the bottom in 300' on the 15H and 500' on the 20H (conservatively). The 6.4 to 1 gear ratio is fast enough for jigging, yet strong enough to put big fish on the deck. These reels are competitively priced for a high-performance reel.
Elevate the reel with a Gomexus power handle and we will install at no cost for you!
Daiwa Saltist Star Drag Conventional Reels Features:
15H Specs: Great up to about 300' water depth
- Maximum drag pressure from 17.6lbs
- 330 yds 30# braid
- 39.5” inches per crank
- 15.2 oz.
- Built from machined aluminum with an anodized finish for greater corrosion resistance
- Extremely smooth freespool
- 4 stainless steel ball bearings and a roller bearing
- 6.4:1 gear ratio
- Centrifugal Braking System for control and longer casts
20H Specs: Need to go a little deeper?
- Maximum drag pressure from 17.6 lbs
- 430 yds 30# braid
- 39.5” inches per crank
- 15.7 oz.
- Built from machined aluminum with an anodized finish for greater corrosion resistance
- Extremely smooth freespool
- 4 stainless steel ball bearings and a roller bearing
- 6.4:1 gear ratio
- Centrifugal Braking System for control and longer casts
35H Specs: Deep Drop!
- Maximum drag pressure from 22 lbs
- 600 yds 30# braid
- 47.4” inches per crank
- 20.1 oz.
- Built from machined aluminum with an anodized finish for greater corrosion resistance
- Extremely smooth freespool
- 4 stainless steel ball bearings and a roller bearing
- 6.4:1 gear ratio
- Centrifugal Braking System for control and longer casts